Details
The AR300U Xclone is a UHF long-range Wiegand reader developed for reliable parking access control in mid-range applications. Capable of reading distances up to 10 meters—depending on solar film, environmental conditions, and card positioning—it features a durable PET housing that is resistant to sun and rain. The unit is supplied with a mounting bracket, LED status indicators, and customizable software settings, making it a versatile and user-friendly solution.
Feature Highlights
LESS MAINTENANCE
UHF card is passive (no battery required).
TRIGGERED READING
Reads only when trigger signal is enabled (recommended with loop detector).
DELAY FUNCTION
5-second preset delay for subsequent readings to avoid anti-passback error.
COMPLIANCE TO MALAYSIA REGULATION
Certified by Malaysia SIRIM & MCMC.
USER FRIENDLY
LED indicators – Red (no card), Blue (successful read).
PROGRAMMABLE PARAMETERS
WG26 / WG34, delay time, trigger or continuous reading, and more.
Specifications
| Dimension | 215 × 225 × 52 mm |
|---|---|
| Frequency | 919–923 MHz (Malaysia SIRIM MCMC compliant) |
| Data Output | Wiegand 26/34 |
| Reading Range | Up to 10m (2–6m with solar film) |
| Input | DC12V, 100mA (idle), 500mA (active) |
| Power Consumption | 2W |
| Output Power | 30 dBm |
| Protection | IP66 (waterproof & weatherproof) |
| Operating Temp | -20°C to +70°C |
| Storage Temp | -40°C to +85°C |
| Humidity | 0–95% (non-condensing) |
| Standards | ISO 1800-63 |
| Net Weight | 0.8 kg |
Recommended Application
UHF Card Specification
UHF card is made of PEC material that can withstand heat at vehicle windshield.
| Material | PEC (heat resistant on windshield) |
|---|---|
| Type | Passive RF backscatter |
| Read Distance | Up to 1000 cm (depends on solar film/environment) |
| Memory | 64 bits read-only (38 bits Unique ID, 16 bits CRC) |
| Multiple Read | 50 tags/sec (binary-tree system) |
| Size | 85 × 53 × 1 mm |
| Operating Temp | -20°C to 65°C |
| Life | 10 years |
| Installation | Keep at least 10mm clearance from windshield surface |
UHF Sticker Specification (CDUT133L)
| Placement | Number plate / side mirror (not on windscreen or metal surfaces) |
|---|---|
| Frequency | 902–928 MHz |
| Operating Distance | ~10m (antenna dependent) |
| Memory | 240 bits EPC memory |
| Write Cycles | 100,000 |
| Data Retention | 10 years |
| Write Protection | Blockwise |
| Form | Wet inlay, label |
| Multi-read | Yes |
| Water Resistant | Yes |
| Operating Temp | -20°C to +80°C |
| Static Pressure | 10 N/mm² |
| RF Protocol | ISO / IEC 18000 |
Sticker Placement Guidelines
The sticker can be applied on the side mirror—ensure the surface is clean before placing it.
It may also be installed on the front number plate, but please clean the area thoroughly before application.
**Do not place the sticker on the windscreen, metal surfaces, or near metallic objects, as this will significantly reduce the reading range.
View more about AR300U Xclone UHF Long Range Wiegand Reader on main site